Plasma polymerization. VII. An esca investigation of the RF plasma polymerization of perfluorobenzene and perfluorobenzene/hydrogen mixtures

The composition and gross structural features of plasma polymers formed in the glow regions of an inductively coupled RF plasma with perfluorobenzene and perfluorobenzene/hydrogen mixtures were investigated by ESCA as a function of the operating parameters. The carbon-to-fluorine stoichiometries of the perfluorobenzene polymers are similar and close to those of the starting material but not of the polymers derived from perfluorobenzene/hydrogen mixtures. The rate of film deposition is dependent on the W/FM parameter. Angular and photon energy-dependent studies confirm the vertical homogeneity of the plasma polymer films investigated.     

Proton ionizable crown compounds. 18. Comparison of alkali metal transport in a H2O-CH2Cl2-H2O liquid membrane system by four proton-ionizable macrocycles containing the dialkylhydrogenphosphate moiety

The macrocycle-mediated fluxes of alkali, alkaline earth, and several transition metal cations have been determined and compared in a H₂O-CH₂Cl₂-H₂O liquid membrane system using four water-insoluble macrocycles containing a dialkylhydrogenphosphate moiety. Transport of alkali metal cations by these ligands was greatest from a source phase pH = 12 or above into an acid receiving phase (pH = 1.5). Very low fluxes were observed for the transport of the alkaline earth cations and all transition metal ions studied except Ag⁺ and Pb²⁺ which were transported reasonably well by these new macrocycles.Deceased: September 5, 1987.     

Spectral properties of selected UV-blocking and UV-transmitting covering materials with application for production of high-value crops in high tunnels

The spectral properties of selected UV-blocking and UV-transmitting covering materials were characterized by means of a UV-VIS spectroradiometer or a UV-VIS spectrometer to provide researchers and growers with guidelines for selecting suitable materials for use in studying the effects of ambient solar UV radiation on the production of tomatoes and other high-value crops in high tunnels. A survey was made of a wide range of plastic covering materials to identify commercially available products that had the desired characteristics of transmitting high levels of photosynthetically active radiation and of being stable under ambient solar UV radiation. The study was focused on evaluating films that either blocked or transmitted UV wavelengths below 380 nm to determine comparative growth, yield and market quality and to provide a tool for integrated pest management. Based on this survey, two contrasting covering materials of similar thickness (0.152 mm) and durability (4-year polyethylene), one a UV-blocking film and the other a UV-transmitting film, were selected and used to cover two high tunnels at Beltsville, MD. Spectroradiometric measurements were made to determine comparative spectral irradiance in these two high tunnels covered with these materials and under ambient solar UV radiation. Comparative measurements were also made of selected glass and plastic materials that have been used in UV exclusion studies.     

Synthesis, characterization, and stability of Fe-MCM-41 for production of carbon nanotubes by acetylene pyrolysis

Fe-substituted MCM-41 molecular sieves with ca. 1, 2, and 3 wt % Fe were synthesized hydrothermally using different sources of colloidal silica (HiSil and Cab-O-Sil) and characterized by ICP, XRD, N2 physisorption, UV-vis, EPR, TPR, and X-ray absorption. Catalysts synthesized from Cab-O-Sil showed higher structural order and stability than those from HiSil. The local environment of Fe in the mesoporous material as studied by UV-vis reveals the dominance of framework Fe in all the as-synthesized Fe-MCM-41 samples. Dislodgement of some Fe species to extraframework location occurs upon calcination, and this effect is more severe for Fe-MCM-41 (2 wt %) and Fe-MCM-41 (3 wt %), as confirmed by EPR and X-ray absorption. These materials have been used as catalytic templates for the production of carbon nanotubes (CNTs) by acetylene pyrolysis at atmospheric pressure. A relationship between the Fe loading in MCM-41 and the carbon species produced during this reaction has been established. Using our optimized conditions for this system, Fe-MCM-41 with ca. 2 wt % Fe showed the best results with particularly high selectivity for single-wall carbon nanotube (SWNT) production. This catalyst was selective for carbon nanotubes with a low amount of amorphous carbon for a narrow range of temperatures from 1073 to 1123 K. To account for the different selectivity of these catalysts for CNTs production, the local environment and chemical state of Fe in the used catalyst was further probed by X-band EPR.     

Applications of array biosensor for detection of food allergens

Although food is a necessity, compounds within food products can be dangerous and life-threatening for people with food allergies. These allergy-causing compounds, such as proteins from eggs and milk, must be identified on the labels of commercial products. Unintentional contamination of food with these compounds occurs as a result of storage, manufacturing procedures, or cleaning procedures. A sensitive, specific, and rapid method to identify foods containing allergens is required by the food industry. The array biosensor, a rapid detection system, may provide a solution to this need. The array biosensor performs fluorescent immunoassays on the surface of a planar waveguide by first running samples, then fluorescently labeled antibodies, over a surface patterned with capture antibodies. An optical image is captured by a charged-coupled device camera and converted into fluorescence values. Signal intensity and spot location provide information on the compound and its concentration. The array biosensor has been successfully demonstrated for toxin, bacteria, and virus detection at low levels in under 20 min in food, clinical samples, and environmental matrixes. An assay for detection of ovalbumin as an indicator of egg contamination has been developed with limits of detection of 25 pg/mL in buffer and 1.3 ng/mL (13 ng/g) in non-egg pasta extract (buffer:pasta 10:1, v/w).     

Mono-cyclopentadienyl complexes of lanthanum: synthesis and characterization of anilido derivatives

Use of the bulky cyclopentadienyl ligand [η⁵-C₅H₂(SiMe₃)₃-1,2,4]⁻ (Cp?) allows for the isolation of monomeric, mono-ring lanthanide species. As previously reported, (Cp?)K reacts with LaI₃(THF)₄ (THF=tetrahydrofuran) in THF/pyridine to form the mono-ring complex (Cp?)LaI₂(py)₃ (1) (py=pyridine); a minor product of this reaction is the bis-ring species (Cp?)₂LaI(py) (2). The solid state structure of 2 reveals a monomeric compound containing a pseudo-tetrahedral metal center exhibiting no unusual intramolecular contacts. Addition of one equiv of KNHAr (Ar=2,6-ⁱPr₂C₆H₃) to complex 1 in THF generates the mono-anilido compound (Cp?)LaI(NHAr)(THF)₂ (3), which may be converted to the more stable pyridine adduct (Cp?)LaI(NHAr)(py)₂ (4) by the addition of pyridine to 3. An X-ray crystal structure of 3 indicated a trigonal bipyramidal metal center with the anilido group oriented trans to the iodide atom (N1-La1-I1=123.1(3)°). A structural study on the bis-pyridine adduct 4 revealed a similar C_s-symmetric structure with a slightly increased N_anilido-La-I angle of 132.1(2)°. Addition of KNHAr to the di-iodo bipyridine adduct (Cp?)LaI₂(bipy)(py) (5), in which the two iodide atoms are cis-disposed, yields the mono-anilido complex (Cp?)LaI(NHAr)(bipy)(py) (6) (bipy=2,2^′-bipyridine); this compound may also be prepared by the addition of bipy to (Cp?)LaI(NHAr)(py)₂ (4). An X-ray diffraction study shows that the lanthanum center in 6 is octahedrally coordinated by a Cp? ring, an iodide, an anilido group, a pyridine molecule and two nitrogens of a bipy molecule. In this case, the anilido moiety and the iodide ligand are arranged in a cis fashion (N_anilido-La-I=111.2(2)°), resulting in a complex with C₁ symmetry. Both (Cp?)LaI(NHAr)(py)₂ (4) and (Cp?)LaI(NHAr)(bipy)(py) (6) are inactive as catalysts for the hydroamination/cyclization of 2-amino-hex-5-ene.     

An STO-3G investigation of barriers to rotation in model systems for aromatic polycarbonates

Non-empirical, STO-3G, and semi-empirical, MNDO, calculations have been performed to investigate the rigid rotation of the phenyl group in phenyl carbonic acid, as a model for Bisphenol A polycarbonate. The MNDO results predict a barrier to rotation of ～55 kcal mole^?1, a factor of ～2 greater than that for the STO-3G computations. Analysis of the relevant orbital energies dictates that the lowest excited state of phenyl carbonic acid is $\text{π → π}{}^1$.     

BonDNet: a graph neural network for the prediction of bond dissociation energies for charged molecules

A broad collection of technologies, including e.g. drug metabolism, biofuel combustion, photochemical decontamination of water, and interfacial passivation in energy production/storage systems rely on chemical processes that involve bond-breaking molecular reactions. In this context, a fundamental thermodynamic property of interest is the bond dissociation energy (BDE) which measures the strength of a chemical bond. Fast and accurate prediction of BDEs for arbitrary molecules would lay the groundwork for data-driven projections of complex reaction cascades and hence a deeper understanding of these critical chemical processes and, ultimately, how to reverse design them. In this paper, we propose a chemically inspired graph neural network machine learning model, BonDNet, for the rapid and accurate prediction of BDEs. BonDNet maps the difference between the molecular representations of the reactants and products to the reaction BDE. Because of the use of this difference representation and the introduction of global features, including molecular charge, it is the first machine learning model capable of predicting both homolytic and heterolytic BDEs for molecules of any charge. To test the model, we have constructed a dataset of both homolytic and heterolytic BDEs for neutral and charged (−1 and +1) molecules. BonDNet achieves a mean absolute error (MAE) of 0.022 eV for unseen test data, significantly below chemical accuracy (0.043 eV). Besides the ability to handle complex bond dissociation reactions that no previous model could consider, BonDNet distinguishes itself even in only predicting homolytic BDEs for neutral molecules; it achieves an MAE of 0.020 eV on the PubChem BDE dataset, a 20% improvement over the previous best performing model. We gain additional insight into the model''s predictions by analyzing the patterns in the features representing the molecules and the bond dissociation reactions, which are qualitatively consistent with chemical rules and intuition. BonDNet is just one application of our general approach to representing and learning chemical reactivity, and it could be easily extended to the prediction of other reaction properties in the future.

Prediction of bond dissociation energies for charged molecules with a graph neural network enabled by global molecular features and reaction difference features between products and reactants.     

Radiation-induced grafting of hexafluoroacetone to polyethylene

Although hexafluoroacetone is not polymerized by ionizing radiation, it is shown that γ-irradiation of hexafluoroacetone dissolved in polyethylene films produces a graft with a G value of 500 and, therefore, a kinetic chain length of 200. The effects of dose rate (0.021–3.55 Mrad/hr), temperature (21–53°C), and pressure (1.5–6.2 atm) on the graft rates have been measured. Also the effect of temperature (21–53°C) on the postirradiation grafting reaction and on the physical properties of the grafted films have been investigated. Together with solubility, diffusivity, infrared, and EPR data, the results lead to the following mechanism: The first step represents production of secondary alkyl radicals in the polyethylene by irradiation of the polymer–monomer system. The second step involves the linkage of the monomer to the radical site to form the alkoxy radical. Since it cannot add to another monomer unit, this radical abstracts a hydrogen atom from an adjacent polyethylene chain in the third step. Radical R· can then continue the kinetic chain. Radical combination and radical–impurity reactions terminate the chain. The graft may be unique in that it is the only one we have found in which a pendant group containing only one monomer unit is attached by a chain reaction. At dose rates up to 0.215 Mrad/hr, the grafting was linear with time and proportional to the 0.73 power of the dose rate at 21°C and to the 0.81 power at 53°C. The reaction is insensitive to increases in dose rate above 0.215 Mrad/hr where diffusivity measurements show the reaction to be diffusion-controlled. The rate of reaction increased 10% when the temperature was increased from 21 to 53°C. While there was significant postirradiation grafting reaction at 21°C, there was none at 53°C. The results do not fit the equations of reaction-controlled steady-state graft-polymerization kinetics. The deviations arise from an observed increase in monomer solubility in the film with increasing graft combined with low diffusivity of the monomer in polyethylene, and the presence of a radical-scavenging impurity which terminates the kinetic chain with the appearance of a relatively stable radical. EPR data suggests that the impurity is a trace of oxygen which may be produced radiolytically.     

Bifunctional atomic force microscopy probes for molecular screening applications

Force mapping with the atomic force microscope (AFM) allows the simultaneous acquisition of topography and probe-sample interaction data. For example, AFM probes functionalised with an antigen can be employed to map the spatial distribution of recognition events on a substrate functionalised with its specific antibody. However, to date this method has been limited to the detection of single receptor-ligand species. Were the detection of multiple receptor-ligand interactions possible, force mapping would offer great scope as a sensitive tool for bioassay and screening applications. We have developed an immobilisation strategy, which allows two different molecular species (in this case human serum albumin and the β subunit of human chorionic gonadotropin) to be present simultaneously on an AFM probe. Single point force spectroscopy results have revealed the ability of such probes to discriminate between their corresponding recognition points (anti-HSA and anti-βhCG IgG antibodies). As a control, force measurements were re-recorded in the presence of the known antigen (free in solution) for each antibody species and a marked decrease in the frequency of specific interaction is observed. As an additional control interactions between anti-βhCG IgG and the multifunctional probe are taken in the presence of free βhCG (“true” antigen) and free HSA (“false” antigen). It is shown that measurements recorded in the presence of a non-related protein species results in no change in either the force observed or the frequency of specific interactions, further confirmation that the specificity of force observed is due to the separation of antibody-antigen complex.